Others in this category
  • Timbercare Touchwood Polyurethane Crystal Clear
  • Timbercare Touchwood Polyurethane Crystal Clear - Semi Gloss
  • Timbercare Touchwood Polyurethane Crystal Clear - Matt
  • Timbercare Tuffkote 342 Clear (2 Pack) - Gloss
  • Timbercare Tuffkote 342 Clear (2 Pack) - Semi Gloss
  • Timbercare Tuffkote 342 Clear (2 Pack) - Matt
  • Touchwood Alkyd Varnish - Gloss

Timbercare Solid Oil Stain

Water resistant timber stain for interiors and exteriors.

Timbercare Solid Oil Stain is an oleoresinous based timber stain, which hides the wood grains. The product is also available in Tonga, Solomon Islands and Vanuata.

Features

See all
Excellent adhesion Very good grain sealerSelf priming
Finishes -Matt

Surface preparation:

  • Remove dirt, dust or loose flaking paint, if any, using sandpaper. Dust off entire area to be painted.
  • Fill surface imperfections like nail holes, cracks, etc. with suitable wood filler.
  • Sand the surface smooth using 220-mesh sandpaper, and dust off.


Application Procedure:

  • Stir the contents thoroughly before and during use.
  • No primer is required before application of this product.
  • Apply two or three uniform coats of Timbercare Solid Oil Stain by convenient method of application.

 

Available Packs


1 Ltr


4 Ltr

1 Coat
10-12 Sq M / Ltr / Coat**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

we also recommend

  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Confident

LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!