High quality single pack polyurethane clear sanding sealer for sealing wood grains. The product is also available in Tonga, Solomon Islands and Vanuata.
Features
See allSurface preparation:
- Remove all wax, grease and oil by cleaning with thinner. Sand the surface uniformly along the grain marks and dust off.
- Fill the surface imperfections such as nail holes, cracks, etc. by suitable wood filler. Sand the surface smooth and dust off.
Application Procedure:
- Stir the contents thoroughly before and during use.
- On new surfaces, apply one or two coats of Touchwood Brushable Sanding Sealer.
- Carry out light sanding after 24 hrs to obtain smooth finish. Dust off and apply Polyurethane Clear in desired finish.
Tools you will need
Available Packs
1 Coat
14-16 Sq M / Ltr / Coat**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Confident
dealer locator
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.